UC11_R_10 https://repo.valu3s.eu/use-cases/uc11-automated-robot-inspection-cell-for-quality-control-of-automotive-body-in-white/requirements/uc11_r_10 https://repo.valu3s.eu/@@site-logo/logo_valu3s_green_transparent.png UC11_R_10 Requirement ID 10 Requirement Textual Description Secure Gateway must have secure and wireless communication interfaces and support IEEE 802.3, IEEE 802.3y, IEEE 802.3z Ethernet standard; 802.11a/b/g/n and 802.11ac WiFi standard Requirement Type Cybersecurity Requirement Test Cases Requirement Test Cases List UC11_TC_18 *Precondition: Secure Gateway has been installed / connected under UC11. * Input conditions / steps: Periodic data transfer is started and web interface is renewed every 30 seconds over Ethernet. Gateway is in transparent mode. * Expected outcome: It is expected that the communication will continue uninterrupted for 24 hours and web interface will be accessible. UC11_TC_19 *Precondition: Secure Gateway has been installed / connected under UC11. * Input conditions / steps: Encrypted data transfer is periodically initiated over the gateway. * Expected outcome: In encrypted communication, the data rate is expected to be 140KBps UC11_TC_20 *Precondition: iPerf software is installed on the Firmware of Secure Gateway. * Input conditions / steps: The iPerf software included in the Secure Gateway software is started. * Expected outcome: Secure gateway Ethernet speed testing with iPerf result is obtained 1 MB / sec or higher. UC11_TC_21 *Precondition: A PC with HSM must be connected via PCIe and HSM driver has been installed correctly on the PC. * Input conditions / steps: OpenSSL's PKCS # 11 test software is run for AES ,Random number generation, key generation * Expected outcome: AES Average Encryption / decryption rate for HSM (less than a second for symmetric encryption for 10 MB data) True random number generation throughput result is obtained above 200Mpbs. Key generation speed result is obtained above 50 key per second." VALU3S Framework Evaluation Environment Type Type of environment where the method is applied. It can be more than one type of environment.(Dimension 1) Evaluation Type Type of evaluation performed with that method. If a method is hybrid, more than one type can be selected.(Dimension 2) Type of Component Under Evaluation Type of components that can be evaluated with that method. It can be more than one type.(Dimension 3) Evaluation Stage The evaluation stage where the method is used.(Dimension 5) Purpose of the Component Under Evaluation The type of purpose that can be evaluated by a method. It can be more than one type.(Dimension 6) Type of Requirement Under Evaluation The type of requirements that a method is able to evaluate. It can be more than one type.(Dimension 7) Evaluation Performance Indicator The type of evaluation criteria or KPI that a method is able to improve. It can be more than one type.(Dimension 8) Contents There are currently no items in this folder.
